Nora Lighting’s 3" low voltage housing provides soft, brilliant JC or crisp, defined MR16 quartz halogen illumination to any application. A wide variety of attractive trims provide beautiful decorative enhancements to any ceiling. Transformer: 120V input and 12V 50 watt output magnetic
Minimum Clearances: Non-IC housing requires minimum clearances of 3" from thermal insulation and 1/2" from adjacent building components
Ceiling Thickness: Housing accepts 3/8" ceiling thickness only.
Lamp Adjustment: Circular bracket on low voltage trims provides a secure snap-in hold and friction-locked aiming adjustment. Trims for JC sockets have sockets preset for optimum angle and light output. UV/Shatter Guard Shield: All low voltage trims include a tempered UV/shatter shield. Dimming: Use only magnetic low voltage dimming control
Installation: High tension tempered steel springs secure remodel housings evenly to ceiling; hole cutout template provided for convenience.
Junction Box: Contains one 3/4", two 1/2" knockouts and four Romex pryouts with strain relief
Electrical: Quick connector (Q) or standard wire nuts
Lamp Max: 50W 12V MR16
Length: 14-1/4"Width: 3-1/4"Depth: 4-5/8"Ceiling Opening: 3"
Listing: UL Listed w/ Feed Through.
- CULus -(Only for Designated Trim): Yes
- Washington State Approved Certification: Yes
- Ceiling Opening: 3.00