Ceiling fan attaches to electrical junction box securely anchored and capable of withstanding a load of at least 50 lbs.
Ceiling fan requires a grounded electrical supply line of 120 voltsAC, 60 Hz, 15 amp circuit.
172 x 20 motor is designed for optimal performance with this fan.
A set of four 23' reversible cherry/walnut wood blades are included. Fan can be configured for 2-, 3- or 4-blade
operation. Not recommended for Damp Location.
The hand-held touch screen remote control CRL8TS (with receiver) is included. Touch-screen remote has 3 separate fan speeds and off position, 1 to 12-hour fan timer and 3 min delay light-off feature. Reversing switch located on fan housing. Optional wall control (CWRL4WH/LA) is available.
2-bulb (18-watt max low-profile CFL bulbs - included) downlight fixture is included with this fan assembly but not required for fan operation (cap is included for use in its place). Maximum downlight wattage not to exceed 36 watts.
The Multimax™ fan comes with a 1' Dia. x 6' long downrod (DR1-6). Optional downrods are available in 12', 18', 24', 36', 48', 60', and 72'. For installations requiring a longer downrod, a downrod coupler is available. The Multimax™ fan can be mounted on a sloped ceiling up to 30°. Optional sloped ceiling kits (SCB1-52) are available for slope angles greater han 30° and up to 52°.
- No. of Rods: 8
- Mounting Direction: Down
- Canopy Included: Yes
- Shade Included: Yes
- Sloped Ceiling Adaptable:
- Canopy Diameter: 7.85
- Rod Length(s): 6 x 0.5Warranty: Lifetime